Use Odin To Upgrade Samsung Galaxy S GT-I9000 To Android 2.2 Froyo

Samsung's flagship handset, the brilliant Galaxy S GT-I9000, has been on the unlucky end when information technology came down to receiving the official Froyo update, something that has been promised once again and again, and delayed likewise. A copulate of weeks back users in the Nordic region were apotropaic enough to see constituted Froyo updates through their Kies software. At the same clock Samsung announced that the Froyo rollout testament cost consummate to all users everywhere by the finish of November. Recently European users and those in the United Land have also seen the 'frost-bound yogurt' trickling through Kies, with two microcode variants, XWJPA and XXJPO.

If you're not in one of the preceding regions, you'll probably postulate to reserve unsatisfactory the update. This guide aims to cover the process of bright any firmware through the computer software Odin, using the latest I9000XXJPO Froyo microcode (constituted for UK) as mention charge.

First, let's look at the prerequisites. The approach to flashing a leaked Froyo firmware via Odin depends on quite a couple of factors, the foremost beingness the current firmware you're on. If you're coming from Éclair (Humanoid 2.1), you can save up yourself one step. Otherwise if you're already on a leaked Froyo version, you'll need to go back to Éclair and then ostentate Froyo.

Influential – MUST Understand

Before you begin with the flashing process, make dependable that you:

Do not have any lagfix applied

Phone stamp battery is fully charged

SIM and microSD cards are removed

Phone is unlocked (no SIM lock present)

If you're upgrading from an Éclair firmware, never regenerate any information backups

We strongly pep u you to read through the whole guide first before attempting any of this.

Sticking to our reference firmware, here are the items that you need handy in front attempting to upgrade your device.

I9000XXJPO Firmware (tin can be downloaded here – good manners of web.samfirmware.com)
I9000XWJM8 Firmware (needed only if you'Re already using a leaked Froyo build – download here)
512.PIT file (needed for XWJM8 firmware, download here)
803.PIT file (for the XXJPO microcode – download here)
Odin Multi-downloader v1.3 (the actual flashing software system – download here)
Samsung USB drivers (go with Samsung Kies software program, make certain you have the fashionable version)
Samsung USB cable's length (or any other compatible USB cable)
One Samsung Galaxy S GT-I9000

To begin with, download and extract each these files mentioned above to a convenient location, rather on your desktop. The password for both firmware files is "samfirmware.com" (without the quotes). Once you have all the files in place, launch Odin atomic number 3 administrator. On your gimmick end, make sure that you have disabled any lagfix, if applied earlier. Likewise, on the gimmick ending, make a point that on that point is no SIM mesh present on your phone.

Power forth your phone and remove the SIM plug-in and microSD card.
Put across your Galaxy S in download mood by pressing and keeping the bulk down, home and power keys at the same time. You will find out a yellow symbol and the words 'Downloading' erst the telephone has gone into download mood.
Ascertain that the drivers are installed. If you get Kies already installed happening your machine, the drivers are already in place.

That's about it, we're available to begin the flashing sequence.

STAGE 1 (applies only if you are coming from an sooner Froyo build)

We are now active to flash the XWJM8 firmware again (Éclair), sol spend a penny sure that you charge the files for this microcode in Odin.
In Scar, load the 502.PIT file
For PDA, blue-ribbon the 'CODE_I9000XWJM8.gob.md5' data file and for PHONE, blue-ribbon the 'MODEM_I9000XXJM4.pitch.md5' file. Leave altogether others blank.
Make sure that the Re-partition box is chequered. Each other settings should be as shown in the screenshot below.

Beginning

Connect your phone (in download mode) to your PC via the USB cable. It will set up the drivers, or if they are already installed, you will see 'Added' in Odin's message box (screenshot above). A COM port will also get over visible.
Once more make sure that all the selections in Odin's interface are word-perfect. Press the Start button when supported.
The flashing sequence leave start out, and you will see respective messages in Odin. Make a point that the call does not disconnect during this time, atomic number 3 it English hawthorn brick your device permanently.

In Process

At this tip, your phone's screen should be looking something similar this:

DSCN0002

Once the bright sequence has completed, Odin will give a 'Completed' message in the Substance box, and a green PASS will appear on top. Your device will automatically reboot at this point.

Stage 1 complete

Congratulations! You have successfully completed leg one of the process, and now you're running the XWJM8 Éclair firmware.

STAGE 2 (you can get directly here if you are running an Éclair microcode and have flashed originally with 512.Fossa)

Wake Odin over again and this clip load the 803.PIT file in PIT.
In PDA, select the 'JPO_JPO_U_JPP.tar' file.
Go out all opposite settings arsenic they are, and this time make a point that Re-Partition is NOT checked.
Put your phone in download mode again and connect information technology to PC via the USB cable.
Make a point that your selections in Odin match the ones in the screenshot down the stairs.

Stage 2 Begin

Once you're confident that everything is correct, press the start button. The indistinguishable process as earlier leave follow – hold for information technology to downright, making sure that the phone remains adjacent during the whole time. Erst the PASS message appears and the phone begins to reboot, you may remove the USB cable.

You will be greeted by Froyo's lockscreen, customized by Samsung to their own flavor. Congratulations, you have with success upgraded your Samsung Galaxy S to the latest (as of the time of writing) I9000XXJPO Froyo firmware!

Update: Samsung has free the latest XXJPU firmware for Galaxy S, which is Android version 2.2.1 and brings a deal out of improvements over altogether the late versions. You can download it here (courtesy of samfirmware.com – use samfirmware.com as password). Remember to use it with 512.PIT and Re-sectionalisatio CHECKED.

DISCLAIMER: The operating instructions in this guide and the files within are provided as is, without any explicit or implicit guarantee or warrantee of some kindly. The author OR AddictiveTips cannot personify held responsible for any damage that whitethorn pass off to your device as a result of these instructions. This method was with success tested connected Windows 7 32-bit.

Update: If this method ISN't working for you, refer toPoseNotter's gloss below – Editor